Beijing Yuanhua Century Building Materials Co

Ordering phone number:
Characteristics of epoxy repair mortar
High compressive strength, rapid curingbr>
Good bonding performance, strong joint between old and new
High temperature resistance, thermal shock resistance Good
High alkali resistance, UV resistance and waterproof
High temperature resistance, good thermal shock resistancebr>
High alkali resistance, UV resistance and waterproof
Can be constructed on wet base
Technical parameters of epoxy repair mortar
< > < r>Project
< > < r>Performance indicators
< > < r>Test results

< r > < r>Bond strength
< r>()
< > < r>
< > < r>
< > < r>.

< > < r>(+) Water Resistant
< > < r>
< > < r>.

< > < r>
< > < r>.
< > < r>.

< r > < r>Compressive strength
< r> ()
< > < r >
< > < r>
< > < r>.

< > < r>
< > < r>
< > < r >.

< > < r>Flexural strength ()
< > < r>
< > < r>
< > < r>

< > < r>Water permeability ()
< > < r>＜
< > < r>.

< > < r>Hourly water absorption ()
< > < r>＜
< > < r>

< > < r>Water absorption coefficient (.)
< > < r>＜.
< > < r>.


Application of epoxy repair mortar
Anti-striking, anti-cavitation and anti-freezing and thawing of the flow surface of hydraulic structures protection, and repair after damage.
Anti-wear protection and repair of highways, bridges, airport runways, workshops and other engineering parts.
Protection and repair of concrete or metal components in chemical, petroleum, factories, docks and other industries against acid, alkali and salt corrosion.
Reinforcement of cracks, holes, spalling and other parts of buildings and repair of defects such as concrete honeycombs, loopholes, cracks, damaged protective layers and leaking reinforcements.
Epoxy repair mortar construction
Material preparation:
Material: B material: material, first pour the material and B material into the bucket according to the ratio of:, stir and mix evenly, then stir slowly while Add the ingredients until it becomes a homogeneous paste. Note:
Ingredients () and B will appear slightly stratified when stored for a long time. Shake well before use. () It is strictly prohibited to use cement that has not been mixed evenly or is in an initial setting state.
Construction:
,
Partial repair of defective parts:
According to the construction requirements of the project, use a spatula to apply the prepared cement to the repaired area, and compact it while applying. After polishing, it can be put into use.
B
,
Large-area integral surface plastering construction:
When used as an integral surface layer, the thickness should not be less than that on facades and steel structures of concrete or masonry structures. When making the overall surface layer on the surface of the structure, it should be done in two steps, and the interval between each time should not be less than 1. When performing the last wipe, it should be smoothed in one go and should not be applied repeatedly.
Construction of treatment to improve the wear resistance of the ground:
Apply the mixed glue on the ground to be repaired, and the thickness should be no less than 1. There is no need for maintenance after construction. It can be used for people and heavy loads.
Epoxy repair mortar packaging and storage
Packaging:
Packaging specifications are kilogram barrels, or (kg + kg + kg) groups.
Storage:
Stored in a dry, ventilated environment, waterproof and moisture-proof. The shelf life is one month in the unopened state. It can be transported as general cargo.